Product Specs & SDS Sheet

APPLICATION DIRECTIONS: Liberally apply glue to clean, dry wood surfaces for bonding. Secure with clamps for 30 minutes, ensuring a snug fit. Wipe off excess glue with a damp cloth. Let it dry for 24 hours before stressing joints. Sand off any surplus dried glue before staining.

STORAGE: Keep at room temperature. DO NOT USE AFTER FREEZING. Apply only in temperatures above 55 Degrees.

KEEP OUT OF REACH OF CHILDREN AND ANIMALS. 

CAUTION: Avoid eye and skin contact; do not inhale vapors or ingest—NOT FOR HUMAN CONSUMPTION.

EMERGENCY PROCEDURES: In case of eye contact, rinse with water and seek medical attention. For skin contact, wash with soap and water; seek medical attention if necessary. If inhaled, move to fresh air; if symptoms persist, seek immediate medical attention. If ingested, do not induce vomiting unless instructed by medical personnel. For emergencies, call 901-794-8556.

Contact Us: support@bossdogglue.com

• PH: 4.0-6.0
• Bulk Density: 9.1 lbs/ Gallon
• Percent Solids: approx 40-50%
• % VOC: <4g/L
• Viscosity: approx 4000 CPS @ 80F
• Freezing Point: 32 Degrees Fahrenheit

Application Guidelines:

• Application Temperature: Above 55 degrees Fahrenheit
• Open Assembly Time: 5-6 minutes (70 degrees F/50% RH)
• Total Assembly Time: 10-15 minutes (70 degrees F/50% RH)
  Required Clamping Pressure: Use enough pressure to secure joints tightly together. (125-175 psi)
• Method of Application: Use glue bottles for general, precise applications: you may also spread using a brush or roller.
• Cleanup: Use a wet cloth while glue is wet. If glue is dry, scrape off and sand excess.

DIRECTIONS: Begin by ensuring that all working surfaces are both clean and dry. Apply glue to one of the surfaces; if using an activator, apply it to the opposing surface. Carefully join the pieces together, holding them in place until the glue sets. The curing times indicated on the front label apply when the activator is used.

WARNING: USE ONLY IN A WELL-VENTILATED AREA. DANGER: FLAMMABLE LIQUID. This product bonds skin and other tissues instantly. It contains 2-Propenoic acid, 2-cyano-, ethyl ester, which can irritate the skin, eyes, and respiratory tract. Avoid contact with eyes and skin, and do not inhale the vapors. Do not ingest this product. Keep it away from heat sources. FIRST AID: In case of eye exposure, do not force the eyes open. Rinse thoroughly with water and seek immediate medical attention. For skin contact, wash the affected area with water and consult a doctor if necessary. If inhaled, move to fresh air and seek medical assistance if symptoms persist. For more information, refer to the Safety Data Sheet. This product is not suitable for use with food items. KEEP OUT OF REACH OF CHILDREN AND ANIMALS.

Contact Us: support@bossdogglue.com

BOSSDOG Professional Strength Super Glue ACTIVATOR speeds up the cure time of all Cyanoacrylate Adhesives. Use ACTIVATOR when you want your super glue to dry instantly. 

DIRECTIONS: 
(For use with all cyanoacrylate adhesives) Begin by ensuring that all working surfaces are both clean and dry. Apply adhesive to one of the surfaces and sparingly apply activator to the opposing surface. Carefully join the pieces together, holding them in place until the glue sets. Alignment time is 2-4 seconds. Allow 10 seconds to set and 30 seconds to cure.

User tips: Store in a cool, dry place. Test before use; Activator may react with certain finishes or materials causing discoloration. In rare scenarios, activator may cause discoloration of PVC siding or granite. 
WARNING: USE ONLY IN A WELL-VENTILATED AREA.
DANGER: EXTREMELY FLAMMABLE (contains acetone). CONTENTS UNDER PRESSURE. This product is an eye and respiratory tract irritant. It contains acetone and Poly(oxy(methyl-1,2-ethanediyl), which can irritate the skin, eyes, and respiratory tract. Avoid contact with eyes and skin, and do not inhale the vapors. Do not ingest this product. Keep it away from heat sources. FIRST AID: In case of eye exposure, do not force the eyes open. Rinse thoroughly with water and seek immediate medical attention. For skin contact, wash the affected area with water and consult a doctor if necessary. If inhaled, move to fresh air and seek medical assistance if symptoms persist. For more information, refer to the Safety Data Sheet available at www.bossdogglue.com. This product is not suitable for use with food items. KEEP OUT OF REACH OF CHILDREN AND ANIMALS.

Formulated to dissolve both cured and uncured cyanoacrylate (super glue), BOSSDOG Debonder is a clear, fast-acting solvent blend designed to break bonds cleanly without unnecessary scraping, sanding, or damage when used properly.

Whether you misaligned a part, made a mess at the bench, or glued your fingers together (we’ve all been there), Debonder gives you control back.

⸻

What It’s Used For

• Separating misaligned or accidentally bonded parts

• Cleaning up excess or spilled super glue

• Removing dried adhesive from work surfaces or tools

• Cleaning glue from dispensing equipment

• Safely debonding skin when accidents happen

⸻

Why You’ll Like It

• Dissolves super glue instead of just softening it

• Low evaporation rate for better working time

• Works best with controlled, repeated applications

• Clear formula for clean, precise use

• Thin viscosity allows it to penetrate tight joints

⸻

How to Use

Apply Debonder by brush, wipe, or pump spray directly to the bonded area.

Allow time for the glue to dissolve, then repeat as needed. Thicker glue may require patience and multiple applications for complete removal.

⚠️ Always test first on plastics, painted surfaces, foam, or finished materials, as Debonder may affect certain substrates.

⸻

Product Details

• Appearance: Clear to amber

• Chemical Type: Organic solvent

• Viscosity: Very low (water-thin)

• Drying Time: Under 25 seconds at room temperature

⸻

Storage & Safety

Store in a cool, dry place, out of direct sunlight.

Use with proper ventilation and follow all standard safety precautions. Avoid prolonged skin contact and review safety data before use.

⸻

BOSSDOG Debonder is the tool you hope you never need—but you’ll be glad it’s on the shelf when you do.